Biesse Rover 16 Floppy Drive Update
FlexiDrive is perfect to replace the 3.5″ floppy drive unit on Biesse Rover 16 with RT480, NC400, NC410 and all Biesse Rover equipment.
All your programs, files and backups on a single SD or USB Stick!
No more Floppies!
You can storage up 2500 floppies on a single SD card or USB Stick.
Compatible with:
| Biesse Rover 16 |
| Biesse Rover 322 |
| Biesse Rover 346 RT480 |
| BIESSE SELCO WNT 200 CNI nc481 |
FlexiDriveS-SD FlexiDriveS-USB FlexiDriveMV-SD FlexiDriveMV-USB
Share this with your friends
Hi, I wanted information about this emulator, having a Biesse Rover 325 with a 3.5 floppy drive, I would like to know if I can transfer programs from a Windows 10 PC to the CNC controller via USB with the aforementioned emulator, thanks in advance, have a good day
Dear Giuseppe. Thank you for contacting us. Yes. FlexiDriveMV is compatible with all Biesse Rover machines and will allow you to transfer programs from a Windows PC to the Biesse Rover machine using a USB flash drive. It is possible that you need to install also a FlexiDriveMV unit on the Programming Windows PC depending on the Design Software that you use on the Programming Windows PC. We will contact you by your email to send you some more information. Best Regards. The FlexiDrive Support Team.
Hi,
we have a biesse rover 13 s with a fualty 3.5″ floppy drive. we are looking for a solution that could mean we can use the drive again and possibly expand the memory capacity. The machine runs on nc 400 format software, do you have a unit that will work with this machine?
Hello Toby
Yes. FlexiDriveMV is compatible with Biesse Rover 13 machines with nc 400 format. With FlexiDriveMV you can store up 2500 Biesse Rover 13 disks on a single USB flash drive or SD Card. We are sending you more information to your email. Thank you and Best Regards. The FlexiDrive Support Team.